How to maintain the Arris solid wood plastic flooring?

Solid wood-plastic flooring is a new type of eco-friendly flooring. Having the texture and durability of wooden flooring. It also has the waterproof and easy-to-clean characteristics of plastic flooring. In order to maintain the beauty and durability of the solid wood plastic flooring. Proper maintenance is very important.

· Sweeping: Use a soft-bristled brush or vacuum cleaner every day. Clean the dust and debris on the floor. Prevent scratching of the floor.

· Mopping: Use a damp cloth or mop to clean the floor weekly. Be careful not to make it too wet. If there are stains, use a specialized wood-plastic flooring cleaner. Avoid using cleaning agents that are acidic or alkaline. To avoid damaging the floor surface.

· Avoid moisture: Solid WPC flooring has waterproof performance. However, prolonged immersion in water can still cause damage to the floor. Therefore, it is necessary to prevent the floor from being exposed to excessive moisture. If there are any water droplets or spilled water, please wipe them dry immediately.

· Avoid scratches: Install rollers or soft rubber pads at the bottom of the furniture. To reduce scratches on the floor when moving furniture. Or you can lay down a carpet at the entrance. To reduce the wear of the floor caused by foreign substances.

· Prevent direct sunlight exposure: Sunlight can cause solid wood-plastic flooring to fade and warp. Therefore, it is necessary to avoid direct sunlight shining on the ground for a long time. You can use curtains or blinds to adjust the lighting. You can also apply special sun protection films on the windows.

· Avoid heavy pressure: If heavy furniture or heavy objects are placed on the new solid wood plastic flooring. Foot pads or wooden partitions should be used to distribute the weight. Prevent any one area of the floor from bearing excessive pressure.

· Regular maintenance: Every once in a while. Polishing agents or waxing agents can be used for the maintenance of the floor. Restore the floor's shine and protective layer. Clean the floor before use. Then evenly apply the conditioner. Follow the instructions to perform polishing or waxing.

· Pay attention to temperature and humidity: Solid wood plastic flooring has strict requirements for environmental temperature and humidity. Typically used in environments with a temperature of 15°C-30°C and a relative humidity of 45%-75%. Therefore, before installing outdoor solid wood-plastic flooring. Proper moisture-proof treatment should be done on the floor, and good indoor and outdoor ventilation should be ensured.

In short, the key to maintaining solid wood-plastic flooring lies in regular cleaning, waterproofing, and avoiding scratches. Only by properly maintaining. Only then can solid wood-plastic flooring maintain its appearance, increase its service life. At the same time, follow the manufacturer's instructions and maintenance methods. You can further learn about the features and usage requirements of solid wood plastic flooring. So as to carry out maintenance better.